| Quantity: | |
|---|---|
TS41
With a combined Al₂O₃ + ZrO₂ content of ≥67%, TS41 is engineered for general-purpose milling in medium-hardness materials. The media deliver a density of ≥4.10 g/cm³ and a Vickers hardness of ≥10 GPa, making them suitable for continuous grinding processes. The wear rate of ≤1.0 g/kg·h ensures steady performance and reduced material contamination.
Technical Indicators:
Al₂O₃ + ZrO₂ ≥ 67%
Density ≥ 4.10 g/cm³
Vickers Hardness ≥ 10 GPa
Fast Mill Wear ≤ 1.0 g/kg·h
Balanced density for stable grinding efficiency.
Cost-effective choice for medium and fine milling.
Good mechanical strength and wear resistance.
Smooth surface and excellent roundness for lower equipment wear.
Suitable for both wet milling and dry milling environments.
Optimized zirconium silicate formulation for consistent quality.
Uniform microstructure and low porosity.
Available in multiple sizes for different mills.
Compatible with water-based, solvent-based, and chemical slurries.
Low contamination of the finished product.
Stable grinding performance across a wide range of materials.
Lower milling cost compared to high-density zirconia media.
Improved production efficiency due to consistent particle reduction.
Reduced maintenance thanks to its smooth surface and controlled wear.
Ideal for paints, inks, ceramics, coatings, mineral processing, and fillers.
Wear tests under fast-mill conditions.
Density and hardness measurements for each batch.
Composition analysis to ensure ≥67% combined alumina and zirconia.
Factory quality certificates available before shipment.
25 kg bags or 1-ton jumbo bags.
Palletized for safe container loading.
Customized packing options available.
Shipped globally by sea, air, or rail.
Full export documentation provided.
Lead time based on order size and production plan.
1. What applications is TS41 suitable for?
Paints, inks, coatings, ceramics, fillers, minerals, and general-purpose milling.
2. Is TS41 more economical than pure zirconia media?
Yes. It offers good performance at significantly lower cost.
3. Can TS41 be used in high-energy mills?
Suitable for medium-energy milling. For high-energy mills, zirconia media may perform better.
4. What sizes are available?
A wide range of diameters to match different grinding equipment.
Looking for reliable and cost-effective grinding media?
Contact us today for pricing, samples, and technical recommendations tailored to your milling process.
With a combined Al₂O₃ + ZrO₂ content of ≥67%, TS41 is engineered for general-purpose milling in medium-hardness materials. The media deliver a density of ≥4.10 g/cm³ and a Vickers hardness of ≥10 GPa, making them suitable for continuous grinding processes. The wear rate of ≤1.0 g/kg·h ensures steady performance and reduced material contamination.
Technical Indicators:
Al₂O₃ + ZrO₂ ≥ 67%
Density ≥ 4.10 g/cm³
Vickers Hardness ≥ 10 GPa
Fast Mill Wear ≤ 1.0 g/kg·h
Balanced density for stable grinding efficiency.
Cost-effective choice for medium and fine milling.
Good mechanical strength and wear resistance.
Smooth surface and excellent roundness for lower equipment wear.
Suitable for both wet milling and dry milling environments.
Optimized zirconium silicate formulation for consistent quality.
Uniform microstructure and low porosity.
Available in multiple sizes for different mills.
Compatible with water-based, solvent-based, and chemical slurries.
Low contamination of the finished product.
Stable grinding performance across a wide range of materials.
Lower milling cost compared to high-density zirconia media.
Improved production efficiency due to consistent particle reduction.
Reduced maintenance thanks to its smooth surface and controlled wear.
Ideal for paints, inks, ceramics, coatings, mineral processing, and fillers.
Wear tests under fast-mill conditions.
Density and hardness measurements for each batch.
Composition analysis to ensure ≥67% combined alumina and zirconia.
Factory quality certificates available before shipment.
25 kg bags or 1-ton jumbo bags.
Palletized for safe container loading.
Customized packing options available.
Shipped globally by sea, air, or rail.
Full export documentation provided.
Lead time based on order size and production plan.
1. What applications is TS41 suitable for?
Paints, inks, coatings, ceramics, fillers, minerals, and general-purpose milling.
2. Is TS41 more economical than pure zirconia media?
Yes. It offers good performance at significantly lower cost.
3. Can TS41 be used in high-energy mills?
Suitable for medium-energy milling. For high-energy mills, zirconia media may perform better.
4. What sizes are available?
A wide range of diameters to match different grinding equipment.
Looking for reliable and cost-effective grinding media?
Contact us today for pricing, samples, and technical recommendations tailored to your milling process.
